污泥螺旋壓榨脫水機/ Sludge Screw Press Hydrating Machine
用 途 :
對造紙污泥產生壓縮作用,達到脫水目的。與濃縮機匹配形成的污泥脫水系統對污泥壓縮濃度達48-50%;壓縮后的污泥 可進入焚燒爐進行燃燒。
結構特點:
根據不同原料和產能的要求,設計不同規格錐形壓縮螺旋,配有小孔徑的脫水篩框。物料出口裝有反壓裝置,通過調整氣控壓力調節出料通道大小進一步提高物料濃度。要使物料達到可焚燒程度,在設備前要有與其匹配的濃縮機同時通入適量的蒸汽。
本設備性能穩定,運行成本低,可對不通用戶進行設備的靈活配置。
Application:
Compression effects on sludge from paper making for dewatering. The
consistency will be 48-50%, the compressed sludge can be burn.
Design Features:
For the requirement of different material and capacity, we design different
cone screw including dewatering basket. Con- press device rise up the
consistency of material.
To bring the material to burn level, need some steam when processing. This
equipment running stable, low cost and flexible configuration.
主要技術參數 / Main Technical Data
螺旋直徑screw diameter
|
|
Φ500
|
Φ650
|
Φ750
|
Φ900
|
Φ1100
|
Φ1250
|
Φ1400
|
|
型號Model
|
ZNV500N
|
ZNV650N
|
ZNV750N
|
ZNV900N
|
ZNV1100N
|
ZNV1200N
|
ZNV1400N
|
污泥濃度
sludge consistency
|
進泥濃度inlet consistency
|
15~22%
|
15~22%
|
15~22%
|
15~22%
|
15~22%
|
15~22%
|
15~22%
|
|
出泥濃度outlet consistency
|
35~55%
|
35~55%
|
35~55%
|
35~55%
|
35~55%
|
35~55%
|
35~55%
|
產能Capacity(t/24h)
|
|
2~8
|
10~20
|
15~30
|
20~40
|
35~50
|
40~65
|
55~85
|
裝配電機功率Motor power(Kw)
|
|
5.5
|
11
|
15~18.5
|
22~30
|
30~45
|
55~90
|
75~110
|
依泥種,要求不同,產量有變動。如工藝需求低進泥濃度或更高出泥濃度,參數可另行設計。
The Capacity shall be subject to type of sludge and requirements. The machine
can be in customerized design if requested for lower inlet consistency or higer
output consistency.