產品概述：
YLC-700型雙向除渣器利用離心原理去除漿料中的各種輕、重雜質。除渣器上、下錐體采用PA66材質，具有較高的強度和耐磨性以及良好的彈性，上、下外殼為玻璃纖維加強的聚丙烯PP。
該除渣器具有全新的進漿設計，通過形成的加速流和較長的停留時間結合在一起，這種設計特點賦予了除渣器很高的分離作用。使用時，良漿圍繞著中部空氣芯進入一個長的輕雜質除渣區，未被擾動的漿流中的輕雜質緊貼空氣芯而被有效從頂部分離出外。良漿則沿器壁以切線方向推出器外，配合我公司生產的150型輕質除渣器使用效果更為顯著。它可用在紙漿凈化系統中，除去漿料中的混合廢棄物、石蠟、粘著物、塑料片、泡沫、氣體、沙石、鐵屑等輕、重雜質。
主要技術參數
進漿能力： 500-700L/min
進漿壓力： 0.2-0.35MPa
進漿濃度： 0.3-1.2％
單段重雜質體積排渣率： 6-8％(相對進漿流量)
單段輕雜質體積排渣率： 1O-12％(相對進漿流量)
Products overview:
YLC - 700 type two-way slag separator using the theory of centrifugal to get rid of various light and heavy impurity in the pulp.Slag on, under the cone use PA66 material, with high strength and abrasion resistance and good elastic, upper and lower case for glass fiber reinforced polypropylene PP.
The slag appliances have new into the slurry design, through the form of accelerated flow and long time together, the design characteristics of slag separator high separation effect.When using, accepts around central air core into a long light impurity slag zone, disturbance of light impurities in pulp flow is not close to be effectively separated out from the top to air core.Accepts the ejector along the wall to the tangent direction, cooperate with our company produces the type 150 light slag separator using effect is more significant.It can be used in the paper pulp cleaning system, remove the mixed waste pulp, paraffin wax, adhesive, plastic, foam, gas, sand, iron and other light and heavy impurities.
The main technical parameters
Into the slurry capacity: 500-700 l/min
Into the slurry pressure: 0.2-0.2 MPa
Into the slurry concentration: 0.3 to 1.2%
Single piece of heavy impurities discharge volume rate: 6-8% (relative into the slurry flow)
Single period of light impurity discharge volume rate: 1-12% (relative into the slurry flow)
|
蘇公網安備 32010202010716號
查看微博
