云峰 450L-500L高效除渣器 山東廠家

型號：HCL-5Y

通過HCL-5Y單獨控制粗渣的濃縮，使之與漿料特性無關。系統的結構緊湊，需要的除渣器段數和個數減少。分離效率更高，運行濃度最高可達3%，內表面光滑，不需要產生湍流的措施。粗渣中雜質含量高，纖維損失更小。通過對粗渣的稀釋以及在所有各段連續排渣使得運行過程中不會出現堵塞且脈沖最小。

主要特點

1、降低纖維損失，提高能力，或減少除渣器的段數，或減少除渣器的個數。

2、除渣效率高，避免在后面各段中出現灰分的積累。運行可靠性高，不會堵塞。

3、客戶可以采取我們的方案，改造成HCL-5Y經濟型除渣器�？蛻粢嗫墒褂迷�有的除渣器；用新的反沖罐更換原來的排渣部件，在改造期間檢查并優化您的除渣器，而我們僅對您的系統進行必要的管道改造。用于漿料制備和上漿系統除去中雜質的多段除渣器。

4、更高收益。由于提高了粗渣濃度以及提高了良漿的潔凈程度，從而減少了纖維的損失，降低了成本。

5、不需要額外的空間，以較低的投資提高了生產能力。

6、除渣器受原料變化的影響降低。

7、由于避免了后面各段灰分積累，減少了磨損。

8、減少了維護量。降低了能耗。

設備優點

最大操作壓力：4kg/cm2

最大操作溫度：70°C

進出漿壓力差：1.6～2.0kg/cm2

單支進漿流量：435~480L/min

最小良漿壓力：0.1kg/cm2

進漿濃度：小于3%

Model: HCL – 5Y

Product Performance
Individually controlled crude residue was concentrated by HCL-5, so it has nothing to do with the slurry characteristics. Compact system, Cleaner segment number and the number needed to be reduced. High separation efficiency, the concentration run up to 3%, smooth inner surface, measures need to generate turbulence. The crude residue high impurity content, fiber loss is smaller. By diluting the crude slag and in all the segments making continuous slagging during operation and will not clog the minimum pulse.

main feature

 Zibo yunfeng industrial ceramics co., LTD
1, reducing fiber loss and improve capacity, or reduce the number of segments Cleaner, or reduce the number of Cleaner.
2, high efficiency Cleaner, to avoid the accumulation of ash in the paragraphs appear in the back. High operational reliability, without clogging.
3, customers can take our program, transformed into HCL-5 Cheap Cleaner. Customers can also use the original Cleaner; replace the original slag components with a new recoil tank, check and optimize your cleaner during the transformation, and we only need your system pipeline transformation. For stock preparation and approach system to remove impurities in the multi-Cleaner.
4, higher earnings. Due to the increased concentration of grits and improve the cleanliness of good pulp, thereby reducing fiber loss and reduce costs.
5, does not require additional space, lower investment increased production capacity.
6, Cleaner affected by changes in raw material decreases.
7, by avoiding the accumulation of ash behind paragraphs, reducing wear and tear.
8, reducing the amount of maintenance. Reduce energy consumption.
Equipment advantages
Maximum operating pressure: 4kg / cm2
Maximum operating temperature: 70 ° C
And out of the plasma pressure difference: 1.6 ~ 2.0kg / cm2
Single into the plasma flow: 435 ~ 480L / min
Minimum good slurry pressure: 0.1kg / cm2
Into the plasma concentration: less than 3%